SprayMax 2K Wash Primer 400ml

Sanded through areas: The SprayMax 2K Washprimer is a specialist in this! Not only does it adhere great to all types of metal, aluminum, 2K fillers and old paint layers, but it is also extremely anti-corrosive. Lightning-fast insulator for sanded areas. Use it where you can see the metal coming out through the old paint and sanded old layers of paint can be seen. Dries quickly and can be repainted. The fine atomization with little overspray ensures a smooth spray pattern and little falling dust. The basic rules, shake well, and clean, sand and degrease your surface thoroughly. Work in just two thin coats, and your adhesion and corrosion protection is fine. It is slightly transparent, do not spray to opaque. Perfect foundation laid for your spot repair. The spray pattern is actually the real reason to buy SprayMax. There are more aerosol cans with good contents. These just don’t spray like SprayMax. The patented technology ensures a very fine atomization and little overspray. Due to the higher working pressure, much less spray dust is flying around. So this cannot fall into your work! SprayMax aerosol cans also maintain their constant working pressure until the last drop. It is the only spray can that can be compared to a spray gun in terms of processing. Can be sprayed over with all common 1K & 2K paint systems, both conventional and water-based. The 2K Washprimer can then be painted over with all standard 1K and 2K acrylic fillers. Binder base: Polyvinyl butyral/epoxy resins. Contains phosphoric acid. Free from zinc chromate and phenol. Colour: Olive gray Gloss level matt