Auto-K Combi filler

Auto-K Combi filler

The Auto-K Combi filler is ideal for smoothing small irregularities and for closing pores in hardened polyester filler layers. In addition, the product is easy to apply and easy to sand

Application:

Remove the rust and sand the damage area thoroughly!

First treat the damaged area with Auto-K anti-corrosion primer, then allow to dry for 30 minutes.

Fill any dents with Auto-K 2-component filler.

Now any remaining pores or scratches can be filled with the Auto-K combined filler.

The combined filler is the final layer before painting.

Apply a thin and even layer of filler and allow to dry for 2-3 hours.

Then sand smooth; repeat the process if necessary.

Product benefits:

– Universally applicable on almost all surfaces, such as steel, galvanized and beaten galvanized sheet steel, iron, wood, natural stone, ceramics, concrete and common plastics.

– Can be applied easily and without pores

– Good sanding properties

– Good adhesion

Packages / packing unit:

100g: 12 pieces per box

200g: 6 pieces per box

Processing time:

Can be processed at any time

Remark:

Ready to sand: after 2-3 hours at 20°C

Clean tools (spatulas, mixing cups) immediately after use (e.g. with acetone, cellulose thinner)