... Skip to content

2in1 Headlight spray Max

Everyone sees them driving sometimes. Cars with those yellow/dull headlights. It can instantly give a completely different look to a car. But how does a 2in1 Headlight actually get such a color and even more importantly. How do you get rid of it?

How does my headlight actually get that dull color?

Sooner or later, all cars will experience wear and tear on your 2in1 Headlight. This is most common in cars that are seven years or older, but that is not surprising when you consider what your headlights have to endure. Brine, UV radiation, crushed stone and not to forget the car wash chemicals.

All this ensures that a thin layer is created on your headlight. This results in your headlight transmitting less and yellowed light. This can cause several problems.

This can mean that your lighting creates less visibility on the road and cars do not always pass the MOT inspection.

There are of course several ways to solve this problem. You can take your car to the garage and have it repaired, but this will easily cost you at least €120 depending on what kind of headlights you have. For example, if you want to have your xenon headlights repaired, this will easily cost you €750 and the question remains how long you will lose your car.

We at Spuitbuskopen.nl see a better option! Set aside a Saturday morning, roll up your sleeves, watch a YouTube video as a backup and just do it yourself! Cost-effective, fast and with fantastic effect. Within 3 hours you can give your headlights new life and you can safely get back on the road.

What do I need to 2in1 Headlight Repair ?

The 2in1 Headlight repair and Silicone Remover from SprayMax and very fine sandpaper.

Roadmap:

1. You need to do very serious cleaning and sanding. Start cleaning the unit with SprayMax silicone remover.

2. Sand depending on damage with P500 / P1000. Sand with very fine grit, last two steps P1000 and P2000.

3. Always clean between sanding passes with SprayMax silicone remover. After your unit is perfectly smooth, give it a final cleaning and wipe down with a tack cloth.

4. Shake the aerosol can for 2 minutes and activate the 2K 2 in 1 aerosol by placing the red button from the cap on the pen under the aerosol. Now press the button firmly on a flat surface and you will feel the hardener container open.

5. Shake well again to mix the hardener. The bus is ready for use. Work in just 2 coats. A first thin closed layer, and after about 10 minutes a second thicker closed layer. Done, more layers make the paint layer less strong.

You can’t help but feel itchy to get started after reading this blog!

For this reason, we have listed the required products for you once again:

– The 2in1 Headlight repair from SprayMax

– Silicone remover from SprayMax

– Very fine sandpaper.